搜索澳门新萄京8522关键词找到我们澳门新萄京8522(www.8522.com)!

澳门新萄京8522-新闻资讯>常见问题>在施工时应该怎样布局?

其他案例

在施工时应该怎样布局?

来源:     发表日期: 2019-02-27 10:04:27     浏览次数:次    
新萄京8522可在地震中给予机电各体系充分维护,可用于抵抗来自程度及蜿蜒方向的地震力的损坏。
Earthquake-resistant brackets can be fully maintained in the earthquake, and can be used to resist the damage of seismic forces from the degree and winding direction.
新萄京8522是以地震力爲首要荷载的抗震支撑体系,针对的是遭遇到设防烈度的地震时能将管道及设备发作的地震效果传到构造体上的一种抗震支撑措施。
Anti-seismic bracket is an anti-seismic bracing system with seismic force as the primary load, aiming at a kind of anti-seismic bracing measure that can transmit the seismic effect of pipeline and equipment to the structure when encountering earthquake with fortification intensity.
新萄京8522的方式和承重支吊架相反也有很多种,首要有:单管抗震支吊架、门型多管抗震支吊架、电气体系管道抗震支吊架、风管抗震支吊架、综合管道抗震支吊架、及设备抗震支吊架等。
There are many different ways of anti-seismic bracket and load-bearing suspension, the first one is single-pipe anti-seismic bracket, portal multi-pipe anti-seismic bracket, electrical system pipeline anti-seismic bracket, wind pipe anti-seismic bracket, comprehensive pipeline anti-seismic bracket, and equipment anti-seismic bracket.
澳门新萄京8522
新萄京8522布点要求
Aseismic Support Location Requirements
1、防排烟风道、事端通风风道抗震支撑大规划间隔9米,纵向抗震支撑大规划间隔18米;
1. The maximum planning interval of anti-smoke duct and end ventilation duct is 9 meters, and the maximum planning interval of longitudinal anti-seismic support is 18 meters.
2、管道中间设置侧向抗震支撑,抗震支撑间隔超越大规划间隔时,应在两头增设抗震支撑。
2. Lateral seismic braces should be installed in the middle of the pipeline. When the spacing of seismic braces exceeds the maximum planning spacing, additional seismic braces should be installed at both ends.
3、程度管线在转弯处0.6m范围内须设置侧向抗震支撑。
3. Lateral seismic braces should be installed in the 0.6m range of turning point for pipelines of degree.
4、门型抗震斜撑有必要至多由一个侧向支撑或两个纵向支撑组成。
4. It is necessary to have at most one lateral brace or two longitudinal braces.
5、理论间隔需经核算停止调整。
5. The theoretical interval needs to be adjusted after accounting.
6、节点分布需思索管径改动和旁通等要素。
6. The distribution of nodes needs to consider such factors as diameter change and bypass.
7、荷载及长细比将影响节点分布。
7. Load and slenderness ratio will affect joint distribution.
如果您想了解澳门新萄京8522详情,欢迎您登录我们的官网:直接在线联络客服人员。
If you want to know more about the manufacturers of anti-seismic brackets, you are welcome to log on to our official website: to contact customer service personnel directly online.
返回上一步
打印此页
?
QQ咨询
0531-88259217
微信扫一扫
XML 地图 | Sitemap 地图