搜索澳门新萄京8522关键词找到我们澳门新萄京8522(www.8522.com)!

澳门新萄京8522-新闻资讯>公司快讯>暖通空调的抗震支吊架的设计应该注意什么?

其他案例

暖通空调的抗震支吊架的设计应该注意什么?

来源:     发表日期: 2019-06-21 15:32:53     浏览次数:次    
1、抗震支吊架的斜撑与吊架的间隔不得大于0.1m。
1. The spacing between the diagonal brace and the hanger of the anti-seismic support and hanger shall not be greater than 0.1m.
2、程度管道应在离转弯处0.6m范围内设置侧向抗震支吊架。
2. The lateral anti-seismic bracket and hanger should be installed in the range of 0.6m from the turning point of the pipeline.
3、程度管道在装置柔性补偿器及伸缩节的两端应设置侧向及纵向抗震支吊架。
3. Lateral and longitudinal anti-seismic support and hanger should be installed at both ends of flexible compensator and expansion joint of the pipeline.
4、每段程度直管道应在两端设置侧向抗震支吊架,当两个侧向抗震支吊架间距大于大设计间距时,应在中间增设侧向抗震支吊架。
4. Lateral anti-seismic brackets should be installed at both ends of each section of straight pipeline. When the spacing between two lateral anti-seismic brackets is larger than the maximum design spacing, lateral anti-seismic brackets should be added in the middle.
澳门新萄京8522
5、每段程度直管道应至少设置一个纵向抗震支吊架,当两个纵向抗震支吊架间距大于大设计间距时,应按请求间距依次增设纵向抗震支吊架。
5. Each section of straight pipeline should have at least one longitudinal anti-seismic bracket. When the spacing between two vertical anti-seismic brackets is larger than the maximum design spacing, the longitudinal anti-seismic brackets should be added in turn according to the requested spacing.
6、当程度管道经过垂直管道与空中设备衔接时,管道与设备之间应采用柔性衔接,程度管道距垂直管道0.6m范围内设置侧向支撑,垂直管道底部距空中大于0.15m应设置抗震支撑。
6. When the degree pipeline passes through the vertical pipeline and connects with the air equipment, flexible connection should be adopted between the pipeline and the equipment. Lateral support should be installed within 0.6 m of the distance between the degree pipeline and the vertical pipeline, and seismic support should be installed when the distance between the bottom of the vertical pipeline and the air is greater than 0.15 M.
7、抗震支吊架与钢筋混凝土构造应采用锚栓衔接,与钢构造应采用焊接或螺栓衔接,关于8度及8度以上的抗震设防,用于衔接设备与空中的收缩螺栓或螺栓应固定在垫层下的构造楼板上。
7. Anchor bolts should be used to connect the anti-seismic support and suspension frame with reinforced concrete structure, and welding or bolts should be used to connect the steel structure. As for the anti-seismic fortification of 8 degree and above, the shrinkage bolts or bolts used to connect the equipment with the air should be fixed on the structural floor under the cushion.
感谢您的阅读,此文的文章来源:澳门新萄京8522更多的内容和问题请点击:我们会继续努力的为您提供服务,感谢您的支持!
Thank you for your reading, this article source: more content and questions of anti-seismic bracket manufacturers, please click: , we will continue to work hard to provide you with services, thank you for your support!
返回上一步
打印此页
?
QQ咨询
0531-88259217
微信扫一扫
XML 地图 | Sitemap 地图