搜索澳门新萄京8522关键词找到我们澳门新萄京8522(www.8522.com)!

澳门新萄京8522-新闻资讯>公司快讯>新萄京8522从哪几个方面检测质量?

其他案例

新萄京8522从哪几个方面检测质量?

来源:     发表日期: 2018-12-13 10:40:32     浏览次数:次    
  你知道怎么检测新萄京8522质量吗,下面就跟着小编一起来了解一下抗震支吊架质量操控流程吧:
  Do you know how to test the quality of the anti-seismic bracket? Let's follow Xiaobian to understand the quality control process of the anti-seismic bracket and hanger.
  1.下料阶段注意事项:
  1. Matters needing attention in the cutting stage:
  ①根据规划图纸选用正确型号和零配件;
  (1) Choose the correct model and spare parts according to the planning drawings;
  ②切开槽钢时,有必要按照槽钢上所示刻度准确切开下料,要求切平笔直,切断平坦。
  (2) When cutting channel steel, it is necessary to cut the cutting material accurately according to the scale shown on the channel steel, requiring that the cutting be straight and flat.
  2.支吊架固定注意事项:
  2. Attentions for fixing support and hanger:
  ①在混凝土结构上,用胀大锚栓固定支吊架时,胀大锚栓的打入有必要到达规定的深度值;用BZ锚栓有必要要用专用工具装置,而且要到达BZ锚栓要求的装置规范。
  In concrete structure, when the expansion bolt is used to fix the support and hanger, the penetration of the expansion bolt is necessary to reach the specified depth value; when the BZ bolt is used, it is necessary to use special tool devices, and to reach the device specifications required by the BZ bolt.
  装置设备:电锤钻、钻头、吹起泵、扭力扳手、适宜尺度的六角套筒。
  Equipment: electric hammer drill, drill bit, blow pump, torsion wrench, hexagonal sleeve of suitable scale.
  ②管道的固定支架应该严厉按照规划图纸要求方位装置,如因为现场情况不能正确装置,应寻求规划院规划师赞同修正管道规划;吊架装置要按施工图装置根部,要求吊杆无曲折变形;支架间隔应按规划要求正确设置;支吊架装置应与管道装置同步进行;施工完毕后应将支架擦洗干净,一切露出的槽钢端部均需装上封盖。
澳门新萄京8522
  (2) Pipeline fixing brackets should strictly comply with the requirements of the planning drawings for orientation devices. If the site conditions are not correct, the planner of the planning institute should seek approval to revise the pipeline planning; hanger devices should be based on the root of the construction drawings, requiring no bending deformation of the hanger; bracket spacing should be set correctly according to the planning requirements; support and hanger devices should be synchronized with the pipeline devices after completion of construction; After that, the bracket should be scrubbed clean, and all exposed channel steel ends should be sealed.
  3.管束的装置注意事项:
  3. Cautions for the installation of tube bundles:
  ①装置滑动支架的管道支座或其零件时,应考虑管道的热偏移,一般应向管道胀大相反方向偏移一定间隔,其偏移值为该处悉数热位移的?;导向支架和滑动支架的滑动面应洁净、平坦,滚珠、滚轴、托滚等活动零件与其支撑件应接触良好,以保证管道能自在胀大;一切活动支架的活动部件均应裸露,不该被保温层敷盖。
  When installing pipeline support or its parts of sliding bracket, the thermal deviation of pipeline should be considered. Generally, the deviation value should be a certain interval in the opposite direction of pipeline expansion. The sliding surface of guide bracket and sliding bracket should be clean and flat, and the movable parts such as ball, roller and supporting roller should contact with their supporting parts well, so as to ensure the pipeline self-expanding. All movable parts of movable support should be exposed and should not be covered by insulation layer.
  以上就是新萄京8522质量的流程介绍,假如您有新萄京8522等产品的需求可以直接电话联络咱们,咱们将诚挚为您服务!
  Above is the process introduction of the quality of the anti-seismic bracket. If you have the demand of the anti-seismic bracket and other products, you can contact us directly by telephone. We will sincerely serve you!
返回上一步
打印此页
?
QQ咨询
0531-88259217
微信扫一扫
XML 地图 | Sitemap 地图