搜索澳门新萄京8522关键词找到我们澳门新萄京8522(www.8522.com)!

澳门新萄京8522-新闻资讯>行业咨询>综合支吊架的质量控制需要怎么做?

其他案例

综合支吊架的质量控制需要怎么做?

来源:     发表日期: 2019-07-24 15:44:33     浏览次数:次    
质量控制是任何工程都应做好的一个步骤,为到达质量请求对技术和管理方面采取的措施,消弭质量上存在的不合格,保证工程质量。综合支吊架质量控制可谓是重中之重的一个环节,在支吊架工程中,对质量的请求比拟高,应该严厉依照国度支吊架制造装置质量验收规则执行,必需依照设计图纸和相关图集来施工制造,这些都只是最根本的请求,除此外,综合支吊架质量控制还需采取以下措施:
Quality control is a step that any project should do well. In order to meet the quality requirements, technical and management measures should be taken to eliminate the unqualified quality and ensure the quality of the project. Quality control of comprehensive support and suspension is one of the most important links. In support and suspension engineering, the quality requirements are comparatively high. It should be strictly implemented in accordance with the national quality acceptance rules for support and suspension manufacturing devices and must be constructed in accordance with design drawings and related atlases. These are only the most fundamental requirements, except that, The following measures should be taken to control the quality of comprehensive support and hanger:
1,源头保质量,支吊架焊接要做好,认真检查不可少,焊缝平均是基本,虚焊砂眼不能有,瑕疵产品早处置;查验焊接工艺参数能否契合工艺请求,严禁大电流焊接。
1. Quality assurance at source and welding of support and hanger must be done well, and careful inspection is indispensable. Welding seam is basic on average, virtual welding sand holes can not be found, defective products can be disposed of early; welding process parameters can be checked to meet the process requirements, and high current welding is strictly prohibited.
澳门新萄京8522
2,一切零部件检验合格前方可停止装配
2. All parts and components can be stopped before they pass the inspection.
3,支吊架的尺寸要正确,认真的停止丈量,最大限度防止误差;
3. The size of the support and hanger should be correct, and the measurement should be carefully stopped to prevent errors to the greatest extent.
4,为保证支吊架装置的精确性,产品拐角要运用角尺来精确丈量,减少误差;
4. In order to ensure the accuracy of the support and suspension device, the corner of the product should be measured accurately by angle ruler to reduce errors.
5,对装置好的支吊架停止丈量实验,严保支吊架得承重才能及结实性。
5. Stop measuring experiment for the well-equipped support and hanger, and ensure the bearing capacity and firmness of the support and hanger.
返回上一步
打印此页
?
QQ咨询
0531-88259217
微信扫一扫
XML 地图 | Sitemap 地图