搜索澳门新萄京8522关键词找到我们澳门新萄京8522(www.8522.com)!

澳门新萄京8522-新闻资讯>行业咨询>新萄京8522吊环的布点有哪些要求?

其他案例

新萄京8522吊环的布点有哪些要求?

来源:     发表日期: 2018-11-30 09:20:06     浏览次数:次    
  现在建筑一般都需要采用新萄京8522吊环对机电管线及设备进行加固,使机电管线及设备与建筑结构体建立可靠连接,在地震发生时新萄京8522可将机电管线及设备承受的地震作用全部传递到结构体上,达到减少和尽量避免次生灾害。
  Nowadays, buildings generally need to reinforce electromechanical pipelines and equipment with anti-seismic bracket rings, so as to establish a reliable connection between electromechanical pipelines and equipment and building structures. When an earthquake occurs, the anti-seismic brackets can transmit all the seismic effects borne by electromechanical pipelines and equipment to the structure, so as to reduce and avoid secondary disasters as far as possible. Harm.
  新萄京8522吊环主要的设计步骤是对管道及设备进行布点→逐一力学计算及选型→逐点验算直至各点均满足抗震设防要求。布点要求如下:
  The main design steps of the suspension ring of the anti-seismic bracket are to arrange the points of the pipeline and equipment to calculate and select mechanics and type one by one to check and calculate point by point until all points meet the requirements of anti-seismic fortification. The layout requirements are as follows:
  1、防排烟风道、事故通风风道抗震支撑最大设计间距9米,纵向抗震支撑最大设计间距18米;
  1. The maximum design spacing of anti-smoke duct and accident ventilation duct is 9 meters, and the maximum design spacing of longitudinal anti-seismic support is 18 meters.
  2、管道两端设置侧向抗震支撑,抗震支撑间距超过最大设计间距时,应在中间增设抗震支撑。
  2. Lateral seismic braces should be installed at both ends of the pipeline. When the spacing of seismic braces exceeds the maximum design spacing, seismic braces should be added in the middle.
  3、水平管线在转弯处0.6m范围内须设置侧向抗震支撑。
澳门新萄京8522
  3. Lateral seismic braces should be installed for horizontal pipelines within 0.6m of turning point.
  4、门型抗震斜撑必须至少由一个侧向支撑或两个纵向支撑组成。
  4. The portal brace must be composed of at least one lateral brace or two longitudinal braces.
  5、实际间距需经计算进行调整。
  5. The actual spacing should be adjusted by calculation.
  6、节点分布需考虑管径转变和旁通等因素。
  6. Node distribution should take into account such factors as pipe diameter change and bypass.
  7、荷载及长细比将影响节点分布。
  7. Load and slenderness ratio will affect joint distribution.
  可以看出新萄京8522吊环得布点要求还不蛮多的,因此,为了保证新萄京8522吊环得作用,进行有效合理得布点相当重要。本公司是专业的澳门新萄京8522,如果您还有疑问可以点击我们的官网进行咨询:/
  It can be seen that there are not many requirements for the location of the suspension rings of the anti-seismic brackets. Therefore, in order to ensure the function of the suspension rings of the anti-seismic brackets, it is very important to effectively and reasonably arrange the locations. Our company is a professional anti-seismic bracket manufacturer, if you have any questions, you can click on our official website for consultation: /
返回上一步
打印此页
?
QQ咨询
0531-88259217
微信扫一扫
XML 地图 | Sitemap 地图