搜索澳门新萄京8522关键词找到我们澳门新萄京8522(www.8522.com)!

澳门新萄京8522-新闻资讯>行业咨询>澳门新萄京8522:新萄京8522有哪些设计原则?

其他案例

澳门新萄京8522:新萄京8522有哪些设计原则?

来源:     发表日期: 2019-02-26 10:20:48     浏览次数:次    
澳门新萄京8522:新萄京8522有哪些设计原则?
Seismic support manufacturer: What design principles do aseismic support have?
抗震支撑是由锚固体、加固吊杆、斜撑和抗震衔接构件组成的。其中悬吊螺杆与管线的节点距斜撑与管线的节点间隔不得超越0.1m,螺杆也可依据需求作加固处置。假如在同一地位设立两个反向的刚性抗震支撑,则可省去悬吊螺杆。还有就是要留意思索到地震力的荷载,刚性抗震支撑的悬吊螺杆和构造锚固件均需加大尺寸,螺杆和锚固件的大承载力需大于算得的地震力。
Seismic bracing is composed of anchor, reinforced suspender, diagonal bracing and seismic connecting members. The joint distance between suspension screw and pipeline should not exceed 0.1m, and the screw can also be reinforced according to the need. If two opposite rigid seismic braces are set up in the same position, the suspension screw can be omitted. Also, we should pay attention to the load of seismic force. The suspension screw and structural anchor of rigid anti-seismic support need to be enlarged in size. The maximum bearing capacity of screw and anchor should be greater than the calculated seismic force.
新萄京8522的作用可是不小,新萄京8522在地震中可以对给排水零碎、空调零碎、电气管线零碎提供充沛的维护,这就要求抗震支吊架在任何时分、任何装置角度都须大于地震力。程度方向的地震负荷需由两个不同方向的抗震支撑承当,由侧向抗震支撑承当侧向负荷,纵向抗震支撑承当纵向负荷。一切抗震支撑须和构造体作牢靠衔接。须经设计人员验算与钢筋混凝土框架构造的梁柱板作刚性衔接,与钢构造作柔性衔接。
Anti-seismic bracket plays a very important role. It can provide abundant maintenance for water supply and drainage fragments, air conditioning fragments and electrical pipelines fragments in the earthquake, which requires that the anti-seismic bracket and hanger should be greater than the seismic force at any time and at any device angle. Seismic loads in degree direction should be borne by two different directions of seismic braces, lateral seismic braces should bear lateral loads, and longitudinal seismic braces should bear longitudinal loads. All aseismic braces must be firmly connected with the structure. It must be checked by the designer to make rigid connection with the beam-column slab of reinforced concrete frame structure and flexible connection with steel structure.
抗震支吊架的施工步骤爲:测量→下料→吊点胀栓(或拧爆)装置→垂直向吊杆装置→横担(或管卡)装置→侧向、纵向加固件装置。小编接上去就爲小同伴们解说一下 管道抗震零碎的布置准绳、 风管抗震零碎的布置准绳、 电气抗震零碎的布置准绳、抗震计算准绳这四个准绳:
The construction steps of the anti-seismic support and hanger are as follows: measurement cutting lifting point expanding bolt (or twisting explosion) device vertical suspender device horizontal load (or pipe clamp) device lateral and longitudinal reinforcement device. The small braid connects to explain for the small companion the pipeline anti-seismic piecemeal arrangement criterion, the wind pipe anti-seismic piecemeal arrangement criterion, the electrical anti-seismic piecemeal arrangement criterion, the anti-seismic calculation criterion these four criteria: the pipeline anti-seismic piecemeal arrangement criterion, the wind pipe anti-seismic piecemeal arrangement criterion, the electric anti-seismic piecemeal arrangement criterion, the
澳门新萄京8522
一. 管道抗震零碎的布置准绳 分爲管道抗震加固侧向间距要求和管道抗震加固纵向间距要求。管道抗震加固侧向间距要求爲:沟槽衔接管道、焊接钢管、钎焊铜管等刚性材质的管线,横向吊架间距大不能超越12m;HDPE等非刚性材质的管线,横向吊架间距大不得超越6m。而管道抗震加固纵向间距要求爲:沟槽衔接管道、焊接钢管、钎焊铜管等刚性材质的管线,纵向吊架间距大不得超24m;HDPE等非刚性材质的管线,横向吊架间距大不得超越12m。
1. The layout criteria of seismic piecemeal pipelines are divided into the requirements of lateral spacing and longitudinal spacing for seismic reinforcement of pipelines. The lateral spacing requirements for seismic reinforcement of pipelines are as follows: pipelines with rigid materials such as grooved joints, welded steel pipes and brazed copper pipes, the maximum spacing of transverse hangers can not exceed 12m; pipelines with non-rigid materials such as HDPE, the maximum spacing of transverse hangers can not exceed 6m. The longitudinal spacing requirement for seismic reinforcement of pipelines is that the spacing of longitudinal hangers should not exceed 24m for rigid materials such as grooved connecting pipelines, welded steel pipes and brazed copper pipes, and that of non-rigid materials such as HDPE should not exceed 12m for transverse hangers.
二. 风管抗震零碎的布置准绳与 管道抗震零碎的布置准绳 一样分爲普通刚性风管侧向抗震吊架和普通刚性风管纵向抗震吊架。普通刚性风管侧向抗震吊架的大间距爲9m,普通刚性风管纵向抗震吊架的大间距爲18m。 玻璃纤维、塑料和其他非刚性材质风管的侧向抗震吊架,大间距爲4.5m,纵向大间距爲9m。
2. The layout criteria of wind pipe seismic fragmentation are divided into the general rigid lateral anti-seismic suspension and the general rigid vertical anti-seismic suspension, just like the distribution criteria of pipeline seismic fragmentation. The maximum spacing of the lateral anti-seismic suspension of the common rigid duct is 9m, and that of the longitudinal anti-seismic suspension of the common rigid duct is 18m. Lateral anti-seismic hangers of glass fiber, plastic and other non-rigid ducts have a maximum spacing of 4.5 m and a maximum longitudinal spacing of 9 M.
三. 电气抗震零碎的布置准绳 刚性电气线管、线槽及桥架侧向抗震大间距不得超越12m,纵向抗震大间距不得超越24m。非刚性材质电气线管、线槽及桥架横向抗震大间距不得超越6m,纵向大间距不得超越12m。
3. The maximum lateral and longitudinal seismic spacing of rigid electrical pipes, grooves and bridges shall not exceed 12m and 24m respectively. The maximum transverse and longitudinal spacing of non-rigid electrical pipes, grooves and bridges shall not exceed 6m and 12m respectively.
四. 抗震计算准绳抗震支吊架零碎的装置方式及布置准绳都是根据严厉的力学计算后果确定的,地震力的计算必需满足标准要求。
4. Seismic calculation criteria The method and arrangement criteria of piecemeal installations of seismic support and suspension frame are determined according to the consequences of strict mechanical calculation. The calculation of seismic force must meet the standard requirements.
综上所述有澳门新萄京8522(www.8522.com)提供,想了解更多澳门新萄京8522,欢迎关注我们的网站:谢谢支持!
In summary, all the above-mentioned Shandong Shengnian Intelligent Technology Co., Ltd. provides, want to know more about the anti-seismic bracket manufacturers, welcome to pay attention to our website: Thank you for your support!
返回上一步
打印此页
?
QQ咨询
0531-88259217
微信扫一扫
XML 地图 | Sitemap 地图